Equipped with its own powerful 44 HP Turbocharged Kubota diesel engine and 3.5-cubic-yard hopper, the TV30 Self-Propelled Sweeper/Vacuum offers maneuverability that simply can’t be attained with a tow vehicle and a pull-type unit. Yet, it provides the same Recirculating Air System performance as our towed models. The TV30 also offers a new level of adaptability, thanks to a line of attachments that includes a sweeper brush for flat surfaces or a rubber finger rotor which excels for leaf and pine needle removal as standard equipment. Also available is a dethatch/verti-cut rotor which performs both up milling and cleanup in one pass. The hopper lifts to a height of six feet to dump directly into a cart or waste dumpster — avoiding the need to handle material twice. Forward placement of the operator seat and controls produces greater visibility of the work area…diminishing the risk of running over or into unseen obstacles.
|Power||44 hp 4 cylinder Turbo Charged 1505 Kubota|
|Configuration||Self Contained, 4 wheel, quad style configuration with front steering, two rear drive wheels, and a rear mounted high lift debris hopper with patented Recirculating Vacuum Air technology|
|Sweeper Head||60” Single sweeping reel with vacuum and poly bristle brush (standard). Follows terrain by maintaining the roll attitude of the front axle (horizontal float) with adjustable height controlled by a continuous roller mounted on rear of sweeper head (vertical float). Rises to transport position, lowers to operating position with twin hydraulic cylinders. (Rubber finger & dethatch rotors optional).|
|Fan||25” diameter 6 blade, 1/4” abrasive resistant radial impeller, housing protected by a replaceable uHMW liner.|
|Debris Hopperr||Capacity 3.5 cubic yards (usable) /1000lbs, rises to 6’4” high to dump into vehicle or container|
|Stabilizers||two (2) side stabilizers, auto deployed with touch sensitivehydraulics.|
|Construction||Frame; 1/4” and 7 gauge formed steel. Sweeper Head and Fan Housing; 10 & 12 gauge formed steel. Hopper; 14 gauge formed steel.|
|Lift||Rises to 6’4” above the ground to dump debris into vehicle or container.|
|Lift Safety||Slope sensor (7% grade) and lift capacity sensor|
|Drive||Hydrostatic two (2) speed drive. Poclain high efficiency piston hydraulic wheel motors on rear wheels with two speed operation and differential lock. Foot pedal control, optional joy stick control.|
|Speed||:Infinitely variable, 0-8 mph low, 0-14 mph high, 0-7 mph reverse (high reverse is locked out).|
|Braking||Dynamic braking through the hydrostatic drive system.
Mechanically applied, hydraulically released parking brakes on rear wheels through wheel motors.
|Tires/Wheels||Front (2) 20-10x10 4 ply grooved tread turf tire; Rear (2)
26-12x12 6 ply Multi Trac C/S tread turf tires.
|Compaction||11.2 psi front, 7.8 psi rear.|
|Steering||Hydraulic Power Steering with automotive type steering wheel and tilt steering.|
|Controls||Electric over Hydraulic: lift/lower of debris hopper, open/close of debris hopper door, raise/lower of sweeper head assembly, broom on/off, and fan on/off.|
|Gauges||Water Temp, Oil Pressure, Volt Meter, Fuel Level, and Hour Meter|
|Seat||High back, adjustable position|
|Electrical||12 volt, electric key start|
|Dimensions||144” Long; 89” Tall; 65” Wide; Wheel Base 84”|
|Weight||4360 lbs (wet).|
|Liquid Capacities||Fuel: 11 Gallon; Hydraulic Fluid: 19 Gallon.|
|Safety & Conformance||Includes Certified ROPS and seatbelt, fold away rear view side mirrors, out riggers for safety during dumping and a solid state max grade detection system for detection of unsafe dumping conditions|
|Hydraulic Oil||Terresolve EL 3068, bio-based high-performance ISO 68 – viscosity grade, severe service|
|Air Cleaner||Enginaire, 7VLR-E2-90.|
|Options||Dethatch/Verti-Cut Rotor, Rubber Finger Rotor, Lights and Brush Rotor.|